Electric Chillers

MHM Water Cooled Screw Chiller

MHM · WCS Series · Shenzhen MHI, China

Semi-hermetic twin-screw chiller, 80–850 TR, R-134a, for plants with cooling towers.

Cooling capacity80–850 TR
RefrigerantR-134a
Power supply415 V / 3 ph / 50 Hz
COP (full load)5.5–6.1
Unloading25–100% stepless
Warranty18 months

Genuine spare parts and AMC available

The WCS series pairs semi-hermetic twin-screw compressors with flooded shell-and-tube evaporators to reach full-load COP above 5.5 with condenser water from a cooling tower. Continuous slide-valve unloading from 25% to 100% suits spinning mills and pharmaceutical plants where load moves with shift patterns.

Units are supplied with electronic expansion valves, oil separators, a colour touch controller and BACnet or Modbus gateway. MHM supplies the matching cooling tower, condenser pumps and plate heat exchanger for free cooling as one package.

Where it is used

  • Spinning and weaving mills
  • Pharmaceutical clean rooms
  • Central plants for hospitals
  • Data centre chilled water
  • Beverage bottling lines
ModelCapacity (TR)Capacity (kW)Input power (kW)CompressorsCondenser flow (m³/h)L × W × H (mm)Weight (kg)
MHM-WCS-080 80 281 52.0 1 × screw 60.5 3200 × 1250 × 1850 2650
MHM-WCS-150 150 527 96.8 1 × screw 113.4 3900 × 1450 × 2050 4300
MHM-WCS-250 250 879 160.2 2 × screw 189.1 4400 × 1750 × 2200 6800
MHM-WCS-400 400 1407 254.9 2 × screw 302.6 4900 × 1950 × 2350 9900
MHM-WCS-600 600 2110 380.3 2 × screw 453.9 5600 × 2100 × 2500 13800
MHM-WCS-850 850 2989 536.7 3 × screw 643.0 6400 × 2300 × 2650 19200

Ratings at standard conditions. Capacities change with ambient, water temperatures and fouling; ask for a site-specific selection.

Hermetic scroll or semi-hermetic screw compressors

Low-vibration compressors with capacity staging keep part-load efficiency high across textile and pharma duty cycles.

Microprocessor controller with Modbus RTU

Leaving-water setpoint, alarms and run hours are readable on the panel and shared to a BMS over RS-485.

Electronic expansion valve

Stable superheat control at 25–100% load and during Dhaka summer ambient swings up to 42 °C.

Hydrophilic-coated condenser fins

Corrosion-resistant fins with 40% longer service life in humid, dusty rooftop conditions.

Phase and pressure protection

Phase-loss, reverse-phase, high/low pressure, anti-freeze and flow-switch interlocks as standard.

Factory run-tested

Every unit is charged, run-tested and tagged with a test certificate before dispatch.

MHM WCS Series Catalogue 2026MHM · MHM Water Cooled Screw Chiller
Request PDF
WCS Performance TablesMHM · MHM Water Cooled Screw Chiller
Request PDF
MHM rooftop chiller and cooling tower installation in Dhaka
Installed by MHM

Supplied, installed and commissioned by our own site team, with spare parts stocked in Mirpur and annual maintenance contracts.

Related

Related products

MHMElectric Chillers ACS Series

MHM Air Cooled Scroll Chiller

Packaged rooftop scroll chiller, 30–260 TR, R-410A, tandem compressors with 25% steps.

View details
CarrierElectric Chillers AquaForce 30XA

Carrier 30XA Air Cooled Screw Chiller

AquaForce air-cooled screw chiller, 80–500 TR, R-134a, Touch Pilot control.

View details
MHMCooling Towers MCT-R Series

MHM FRP Counter-Flow Cooling Tower

Round bottle-type FRP counter-flow tower, 10–1000 TR, rotary sprinkler, PVC infill.

View details
MHMPlate Heat Exchangers MPH Series

MHM Gasketed Plate Heat Exchanger

Stainless plates, NBR/EPDM gaskets, 50 kW–15 MW, for free cooling and process duty.

View details

Enquire about MHM Water Cooled Screw Chiller

Tell us your capacity, site and timeline. We reply with a selection, price and delivery within two working days.